1. Following the installation guide, connect the Media Player to your screen using the supplied HDMI cable.
2. Plug the power cable into the Media Player and a power socket. The Media Player should automatically power on; should it does not, press the power button once.
3. Switch on your screen and select the correct HDMI input.
   

2. Connect to the Media Player using your mobile device

Should the Welcome message not appear, press the power button 4 times to initiate the Factory Reset option, which takes 10 seconds to perform. The Media Player will power o􀆯 at this point, so please press the power button once again to power on.

Using your mobile phone or tablet:

1. • Open your WiFi settings.
2. • Look for a network name like: ‘codapod-00ce39c876cf’ (the exact name will vary).
3. • Tap to connect. No password is required.
   

Your device may warn you there’s no internet — this is expected.

 3. Open the Setup Page

Once connected:

1. A setup page should automatically appear (a captive portal).
2. If it doesn’t, open a browser and go to: http://codapod as directed on screen
   

4. Enter Your Practice WiFi Details

1. • WiFi Network Name (SSID) – e.g., MyPracticeWiFi
2. • WiFi Password (and repeat to confirm)
   

Please ensure these are entered exactly as they are configured — including upper- and lower-case letters, ensuring no trailing spaces are left at the end of the password.

1. Tap Next to complete the steps.
   

Note: The device does not check if the details are correct at this stage. Please double-check spelling before continuing.

5. Rebooting to complete setup

1. • Select Reboot.
2. • Wait 15-30 seconds for the Media Player to reboot.
   

6. Complete Setup & Registration

 If it does not proceed: 

1. • You can press the power button once to pull up the Status Screen, which will show any connection issues:
2. • Should there be any errors in red, please check the WiFi details and consider connecting another device to confirm there is no incorrect information being entered.
3. • If errors are found, you’ll need to re-enter the WiFi details again by following steps 2-5. To return to the Welcome message, press the power button 4 times to initiate the Factory Reset option, which takes 10 seconds to perform. The Media Player will power o􀆯 at this point, so please press the power button once again to power on.
   

Tip: Consider using a physical Ethernet cable if possible, for a quicker & more reliable setup.