Downloading Results

1. Remove the battery from the unit before disconnecting the patient.
   This step prevents noise artifacts at the end of the ECG recording.

2. Disconnect the patient cable from the unit.

3. Connect the unit to the PC using the Grey/Cream USB cable.

4. Ensure the dongle is plugged into the PC.

5. Open CardioScan.

6. Click New Patient.

7. Providing the unit was correctly enrolled, the patient's information will automatically populate. Add any additional information as needed and click Next.

8. Once the transfer is complete, you will arrive at the data analysis screen.

   • If your software is set to auto-analyse, it will automatically generate and print the report.

   • Otherwise, navigate to ECG Strips and manually add all Events and Symptoms.

9. After analysis, proceed to the ECG review screen. From here, you can print the report or create PDF copies by clicking Report.