Support
Patient Call Configuration in EMIS web
The guide goes through how to configure the EMIS web for the CodaSign Patient Call when the system is installed, or you've made changes within the clinical rooms at the surgery. Before starting, you need to ensure that you have a list of all the PC ...
How to do a test patient call from within TPP SystmOne
It is possible to test the CodaSign Patient Call from within SystmOne, provided that the PC sending the call has been configured to use an Envisage board. See Patient Call Configuration in TPP SystmOne for information on how to set this up. From ...
Patient Call Configuration in TPP SystmOne.
This guide shows you how to configure TPP SystmOne to work with the CodaSign Patient Call. With the patient call, there is a patient call System physically attached to a single PC within the surgery, which is either the Gateway PC or one of the ...
Calls not working.
1. Check the Call Agent Power Make sure the Envisage Call Agent is powered on. For SystmOne sites: The Call Agent is usually connected to a reception PC. For EMIS Web sites: The Call Agent is often installed in a central area, such as a comms or ...